Format Drive using CMD - Repair Pen Drive | Techkeguruji.com

    Formatting is a Valuable tool when dealing with any type of storage disk this can help to us to solve any kind of errors and headaches. But what to do if your USB Pen drive needs to be formatted but, every time you try through the property menus it comes up with an error like any type of amybe just a simple error, or won’t even recognize the drive properly. Don’t despair because here is something you can do.. because TeckKeGuruJi is Here with you.

Format pendrive using Command Prompt  is a common process that may need to be undertaken quite frequently and carefully, but unless you have gone through this procedure before it can be a hard and tough Process. The last thing you want is to finish the process and end up with an unusable pen drive . Here is a quick step by step guide to Format pen drive using Command Prompt

#Step-1: Turn on computer.

#Step-2: Once it Boots up insert Pen drive into USB port in your Computer
Please note: if you know the letters associated with your disk locations or can use a utility such as disk part to list this information then skip steps 3 and 4
#Step-3: Go into "My Computer" and look down the navigation panel on the left hand side, this lists down to the popular and root menu folders and locations on your computer.

#Step-4: Your Pen drive should be listed in one of these locations, it may be referred to by brand or a name, as portable storage or something similar. Next to this label will be a letter,
for example “G: removable device ” if the device does not show up you may need to test the port to find the letter with another USB device. This letter needs to be written down or remembered in order to complete this process.

#Step-5: Go to the windows start menu, click start, then click run.

#Step-6: Type command into the run dialog box and click OK, this is to start the command prompt window from which you will be able to choose your format style and name your drive.

#Step-7: Then the command prompt window is opened and you will need to type ” Format G: ” 

 

Formatting Drive using Command Prompt

#Step-9: The G in this instance refers to our example Pen drive`s location, instead you would enter the letter that you remembered or wrote down from the my computer side panel
After you have typed the above command press enter. 

#Step-10: Here, you will be asked to press enter again and then to give a name for your drive. Follow these prompts then click on enter again.

And Boom Now you have cpmleted the process of Formatting any drive using Command Prompt.

#TeckKeGuruJi